KTM RC 390 2018 User Manual

10 RIDING INSTRUCTIONS
84
10.1 Checks and maintenance measures when preparing for use
Info
Before every trip, check the condition of the vehicle and ensure that it is roadworthy.
The vehicle must be in perfect technical condition when it is being operated.
H02217-01
– Check the engine oil level. ( p. 215)
– Check the brake fluid level of the front brake. ( p. 145)
– Check the rear brake fluid level. ( p. 150)
– Check the front brake linings. ( p. 149)
– Check the rear brake linings. ( p. 154)
– Check that the brake system is functioning properly.
– Check the coolant level in the compensating tank. ( p. 196)
– Check for chain dirt accumulation. ( p. 122)
– Check the chain tension. ( p. 124)
– Check the tire condition. ( p. 168)
– Check the tire air pressure. ( p. 170)
– Check the settings of all controls and ensure that they can be
operated smoothly.
– Check that the electrical system is functioning properly.
– Check that luggage is properly secured.
– Sit on the motorcycle and check the rear mirror setting.
– Check the fuel level.

KTM RC 390 2018 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Torque	36 Nm @ 7, 000 rpm
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP monoshock
Front Tire	110/70 ZR17
Rear Tire	150/60 ZR17
Seat Height	820 mm
Ground Clearance	178.5 mm
Fuel Tank Capacity	10 liters
Dry Weight	147 kg
Engine Type	Single Cylinder, 4-Stroke
Power	43 hp (32 kW) @ 9, 000 rpm
Fuel System	Electronic Fuel Injection
Frame	Steel trellis frame
Front Suspension	WP upside-down Ø 43 mm
Front Brake	320 mm disc
Rear Brake	230 mm disc, single-piston caliper
ABS	Two-channel Bosch 9MB ABS