KTM RC 390 2018 - Changing the engine oil and oil filter, cleaning the oil screens

19 SERVICE WORK ON THE ENGINE
216
19.2 Changing the engine oil and oil filter, cleaning the oil screens
Warning
Danger of scalding Engine and gear oil get very hot when the motorcycle is ridden.
– Wear suitable protective clothing and safety gloves.
– In the event of scalding, rinse the area affected immediately with lukewarm water.
Note
Environmental hazard Hazardous substances cause environmental damage.
– Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Drain the engine oil while the engine is at operating temperature.
Preparatory work
– Remove the front spoiler. ( p. 133)
– Stand the motorcycle on its side stand on a horizontal surface.