KTM RC 390 2018 User Manual

BRAKE SYSTEM 14
141
14.1 Antilock brake system (ABS)
H01910-10
The ABS unit
1
, which consists of a hydraulic unit, ABS con-
trol unit, and return pump, is installed under the seat. One wheel
speed sensor
2
is located in each case on the front and the rear
wheel.
Warning
Danger of accidents Changes to the vehicle impair the
function of the ABS.
– Only allow the rear wheel to spin with the front brake
applied away from public road traffic if the ABS is
switched off.
– Do not make any changes to the suspension travel.
– Only use spare parts on the brake system which have
been approved and recommended by KTM.
– Only use tires/wheels approved by KTM with the corre-
sponding speed index.
– Maintain the specified tire air pressure.
– Service work and repairs must be performed profes-
sionally. (Your authorized KTM workshop will be glad
to help.)

KTM RC 390 2018 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Torque	36 Nm @ 7, 000 rpm
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP monoshock
Front Tire	110/70 ZR17
Rear Tire	150/60 ZR17
Seat Height	820 mm
Ground Clearance	178.5 mm
Fuel Tank Capacity	10 liters
Dry Weight	147 kg
Engine Type	Single Cylinder, 4-Stroke
Power	43 hp (32 kW) @ 9, 000 rpm
Fuel System	Electronic Fuel Injection
Frame	Steel trellis frame
Front Suspension	WP upside-down Ø 43 mm
Front Brake	320 mm disc
Rear Brake	230 mm disc, single-piston caliper
ABS	Two-channel Bosch 9MB ABS