KTM RC 390 2018 - Function Buttons

8 COMBINATION INSTRUMENT
62
• Engine hot – Eleven to thirteen bars light up.
• Engine very hot – All thirteen bars light up.
8.9 Function buttons
F01436-10
Press the MODE button
1
to change display modes.
Possible display modes are TRIP F (after reaching the fuel reserve
level), Error, total distance traveled (ODO), distance 1 (TRIP 1) and
distance 2 (TRIP 2).
Press the SET button
2
to change menus within a display mode.
Note
Voiding of the government approval for road use and the insurance
coverage If the ABS is switched off completely, the vehicle's
approval for road use is invalidated.
– Only operate the vehicle in closed-off areas remote from public
road traffic if the ABS is switched off completely.
The ABS can be switched off with the
3
button.