Kubota M7151 - Setting the Auto Shift Sensitivity

OPERATING THE TRACTOR120
BSetting the Auto Shift Sensitivity
The Auto Shift Sensitivity can maintain the engine rpm for
the gear shifting up/down. When the sensitivity is set at a
lower position, the gear shifting is maintained by lower
engine rpm, and when set at a higher position, the gear
shifting is maintained by higher engine rpm.
C When running in the auto shift mode
Refer to the table below for settings according to the job.
1. Eco-friendly operation
The gear is automatically shifted up/down in lower
engine rpm.
2. Power required operation
The gear is automatically shifted up/down in higher
engine rpm.
C When running in the manual operation of the road
mode
During operation, the main gear shift automatically
selected when shifting the range gear shift up or down
changes with the auto shift sensitivity setting.
A Gear shifting example when shifting up
A If you step on the clutch pedal immediately after
shifting the range gear shift up or down, the main gear
shift may be automatically shifted as below.
(1) The main gear shift is shifted down (4→3→2→1)
as the speed decreases.
(2) When coming to a complete stop, speed 1 is
selected.
Operating
Auto shift sensitivity dial
[Standard model]
Auto shift sensitivity
control [Premium model]
Remarks
Eco-friendly
operation
A Turn the dial
counterclockwise.
A Retract the graph
leftward with the
"Minus (-)" switch.
Suited for
light-duty
work
Power
required
operation
A Turn the dial clockwise.
A Extend the graph
rightward with the "Plus
(+)" switch.
Suited for
heavy-duty
work