121OPERATING THE TRACTOR
[Standard model]
[Premium model]
A For detailed settings, refer to "Setting the Engine/
Transmission" in "K-MONITOR" in
"INTELLIPANEL(TM) CONTROL" section.
CVT (Continuously Variable Transmission)
CONTROL
To avoid personal injury or death:
A The ez-command center has no neutral
position. To bring the tractor to a complete
stop, step on the brake pedal or set the shuttle
lever to neutral.
BOutline
The CVT (Continuously Variable Transmission) is a fully
computerized stepless type. Depending on the type of
work, there are two modes to choose from: "Automatic"
and "Manual Engine Speed Setting".
Other settings are also possible at will, including CVT
sensitivity in response to engine load, response control for
start and stop, and cruise control among others.
(1) Auto shift sensitivity dial (A) "Heavy-duty"
(B) "Light-duty"
(1) Auto shift sensitivity control
(2) Plus (+) switch
(3) Minus (-) switch
(A) "Heavy-duty"
(B) "Light-duty"
(1) Ez-command center
(2) Cruise button
(3) Ratio lock button
(4) Mode shift button
(5) Shuttle neutral button
(6) Shuttle enable button
(7) Limp home switch
To Next Page
