123OPERATING THE TRACTOR
C Modifying maximum traveling speed
Maximum traveling speed controlled with the ez-
command center has been factory-set as shown below.
The mode shift’s "low speed" range alone can be modified
for its highest traveling speed.
A Factory-set traveling speeds
Mode shift (low):
Maximum traveling speed up to 15 km/h (9 mph)
Mode shift (high):
Maximum traveling speed at 40-50 km/h (25-30 mph)
(specifications vary)
A Modifying the low-range traveling speeds
Set the desired traveling speed while confirming its digital
display.
A For detailed settings, refer to "Setting the Engine/
Transmission" in "K-MONITOR" in
"INTELLIPANEL(TM) CONTROL" section.
A Example: In the case of working at the 4-6 km/h (3-4
mph) traveling speed, preferably set the low-range
maximum traveling speed to about 10 km/h (6 mph).
With this setting, the traveling speed can be kept at a
nearly constant level (S) in response to the ez-
command center movement (T). In this way, the speed
is easy to finely adjust with the lever.
(1) CVT low-range max. speed setting
(X) Operating times of ez-command center
(Y) Traveling speed (km/h)
(A) Low-range speed of the factory-setting (15 km/h (9 mph))
(B) Modified low-range speed (10 km/h (6 mph))
To Next Page
