158 HYDRAULIC UNIT
HYDRAULIC UNIT
This tractor's hydraulic system is equipped with the
following features, to name a few, to meet a wide variety
of jobs.
1. Load sensing type mix draft control
2. Multiple-segment remote hydraulic control valves
3. Remote hydraulic control with flow control valve
4. Large-capacity external hydraulic power beyond port
[Premium, Premium KVT models]
5. Load sensing variable-displacement hydraulic pump
[Premium, Premium KVT models]
A Do not operate until the engine is warmed up. If
operation is attempted when the engine is still cold, the
hydraulic system may be damaged.
A If noises are heard when implement is lifting after the
depth control dial (hydraulic dial) has been activated,
the hydraulic mechanism is not adjusted properly.
Unless corrected, the unit will be damaged. Contact
your KUBOTA Dealer for adjustment.
3-POINT HITCH CONTROL SYSTEM
To avoid personal injury or death:
A Before using the 3-point hitch controls, ensure
that no person or object is in the area of the
implement or 3-point hitch. Do not stand on or
near the implement or between the implement
and tractor when operating the 3-point hitch
controls.
BTerminology
(1) 3-P. quick raise/lower switch
(2) 3-point hitch lock button
(3) Depth control dial (Hydraulic dial)
(4) Lift arm top limit adjustment dial
(5) 3-point hitch lowering speed adjustment dial
(6) Draft ratio adjustment dial
(7) Ride control switch
To Next Page
