CAB OPERATION190
A While working in a dusty conditions, keep the switch at
the "FRESH AIR" position. This increases the
pressure in the CAB, which helps prevent dust from
coming into the CAB.
BOperation
C Heating
1. Set the mode switch to the position.
2. Set the recirculation / fresh air selection switch to the
"FRESH AIR" position. To raise the temperature in the
CAB quickly, set this switch to the "RECIRCULATION"
position.
3. Adjust the blower (1/2/3/4) switch and the temperature
control dial to achieve a comfortable temperature
level.
4. Adjust the air volume and air direction from the
dashboard air outlets. In general, open Feet area air
outlets, and shut Face / Back area air outlets.
5. To blow out warm air also from behind, open the rear
air outlet and adjust the air direction.
(1) Mode switch
(2) Blower switch
(3) Temperature control dial
(4) Recirculation / fresh air selection switch with
indicator light
(A) "WARM"
(B) "COOL"
(1) Face area air outlets
(2) Back area air outlets
(3) Feet area air outlets
(1) Rear air outlet
To Next Page
