Kubota V2403-M-T - Cam Height

S-83
03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM
DIESEL ENGINE
Cam Height
1. Measure the height of the cam at its highest point with an outside
micrometer.
2. If the measurement is less than the allowable limit, replace the
camshaft.
W1031532
Cam height of intake
Factory
spec.
D1503-M
D1703-M-BG
33.27 mm
1.310 in.
V2003-M
V2403-M-DI-T
V2003-M-BG
V2203-M-BG
33.47 mm
1.318 in.
D1703-M
D1803-M
V2203-M
V2403-M
V2403-M-T
D1803-M-DI
V2403-M-DI
V2003-M-T-BG
V2403-M-BG
33.90 mm
1.335 in.
Allowable
limit
D1503-M
D1703-M-BG
33.22 mm
1.308 in.
V2003-M
V2403-M-DI-T
V2003-M-BG
V2203-M-BG
33.42 mm
1.316 in.
D1703-M
D1803-M
V2203-M
V2403-M
V2403-M-T
D1803-M-DI
V2403-M-DI
V2003-M-T-BG
V2403-M-BG
33.85 mm
1.333 in.
KiSC issued 07, 2008 A