Kubota V2403-M-T User Manual

G-28
03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM
G GENERAL
[12] CHECK POINTS OF EVERY 1500 HOURS
CAUTION
• Check the injection pressure and condition after confirming that there is nobody standing in the direction
the fume goes.
• If the fume from the nozzle directly contacts the human body, cells may be destroyed and blood poisoning
may be caused.
Nozzle Spraying Condition
[D1503-M, D1703-M, D1803-M, V2003-M, V2203-M, V2403-M,
V2403-M-T]
[D1703-M-BG, V2003-M-BG, V2003-M-T-BG, V2203-M-BG,
V2403-M-BG]
1. Set the injection nozzle to a nozzle tester, and check the nozzle
spraying condition.
2. If the spraying condition is defective, replace the nozzle piece.
W10411400
[D1803-M-DI, V2403-M-DI, V2403-M-DI-T]
1. Set the injection nozzle to a nozzle tester, and check the nozzle
spraying condition.
2. If the spraying condition is defective, replace the injection nozzle
assembly.
W1037040
(a) Good (b) Bad
(a) Good (b) Bad
KiSC issued 07, 2008 A

Kubota V2403-M-T Specifications

General

Brand	Kubota
Model	V2403-M-T
Category	Engine
Language	English