Kurzweil Artis User Manual

Multi Edit Mode
Selecting Parameters
8-5
Assign
Assign is the secondary function of the Enter button.
The Assign symbol will be shown in the display next to parameters that can be selected with
Assign.
Pressing a key, switch, or moving a controller while holding down the Enter button will
perform Assign in the following cases.
Enter + Zone (1–4) Button
In Multi Edit Mode, holding the Enter button and pressing a Multi Zone Mute button will
jump to selecting that Zone. The currently selected Zone number can be seen on the top line
of the page.
Enter + Controller
In Multi Edit Mode, holding the Enter button and moving a controller (a Slider, Switch
button, Mod Wheel or Pedal) will jump to selecting the destination parameter of that
controller in the current Zone. This allows you to quickly assign a controller to a destination.
In Multi Edit Mode, holding the Enter button and moving the Pitch Wheel up or down
will jump to selecting the Bend Range Up or Bend Range Down parameters of the current
Zone.
Enter + Key
In Multi Edit Mode with the Low Key or High Key parameter selected, hold the Enter
button and strike a key to set the Low Key or High Key.

Kurzweil Artis Specifications

General

Sound effects	Chorus
Output impedance	400 Ω
Maximum polyphony (notes)	128
Number of transpose switches	2
Number of front panel sliders	9
Keyboard name	Fatar TP100
Keys quantity	88 keys
Headphone outputs	1
Product color	Black
Display resolution	240 x 64 pixels
AC input voltage	90-256 V
AC input frequency	50 - 60 Hz
Power consumption (max)	10 W
General MIDI	No
FX units quantity	16
Effect chains quantity	1000
User programs quantity	256
Number of relative volume zones	4
Cables included	AC, USB

Weight and Dimensions

Depth	395 mm
Width	1385 mm
Height	140 mm
Weight	21000 g