Multi Mode
Selecting Multis
7-4
Category & Program/Multi Buttons
The Category buttons allow you to select Multis by instrument type simply by pressing a
button. You can select one Category button at a time and the current Category button’s
LED is lit.
Each Category contains 16 Multis. First select the Category you want, then select one of the
16 Multis by pressing any of the Program/Multi buttons numbered from 1 to 16.
Choosing Category Default Multis
You can choose a “Category Default Multi” from each Category that will be recalled each
time you press that Category’s button. To save a Category Default Multi, rst select a Multi
using any Multi select method (Alpha wheel, Previous/Next buttons, Category buttons,
Program/Multi buttons). A Category button for the current Category will have a lit LED.
Next, press and hold the currently lit Category button until the display shows the message
“Category default multi saved.” The Category default Multi has now been successfully saved.
You can save one Category Default Multi per Category button.
To Next Page
Loading...
