Program Mode
Selecting Programs
6-5
Category & Program/Multi Buttons
The Category buttons allow you to select Programs by instrument type simply by pressing
a button. You can select one Category button at a time and the current Category button’s
LED is lit.
Each Category contains 16 Programs of a single instrument type. First select the Category
you want, then select one of the 16 Programs by pressing any of the Program/Multi buttons
numbered from 1 to 16.
You can also press one of the instrument Category buttons, then turn the Alpha Wheel
clockwise or press the Next button to advance to the next Program in the Category. When
you reach the end of a Category, the Artis automatically advances to the beginning of the
next Category. This will also work in reverse if you turn the Alpha Wheel counter-clockwise
or press the Previous button. In this case when you reach the beginning of a Category, Artis
automatically advances to the end of the previous Category. The 16 User Categories come
after the factory ones, but only non-empty programs can be selected this way.
To Next Page
Loading...
