Kurzweil Artis - MIDI Program Change Function

The Operating Modes
Functions
5-4
Creating Layers in Program Mode is slightly different from creating Layers in Multi Mode.
See The Layer Function on page 5-3 (for Layers in Program Mode) and The Layer
Function on page 7-10 (for Layers in Multi Mode).
MIDI Program Change Function
Pressing both the 9 & 10 Program/Multi buttons simultaneously takes you to the MIDI
Program Change Function page.
With this Function, you can use a MIDI or USB cable to send a MIDI Program Change
message to an external sound module or computer software. MIDI Program Change
messages allow you to use the Artis to change presets on other MIDI equipment. Doing so
will not affect the local sound (that is, it will not affect the currently selected Program on the
Artis). Your external MIDI device may have program change receive settings to congure.