Kurzweil Artis - Saving a Layer

Program Mode
The Layer Function
6-15
Saving a Layer
After setting the Layer parameters, the Layer can be saved as a Multi so that it can easily be
recalled in Multi Mode. Press the Save button to the left of the display to begin the saving
process. See Save & Delete User Multis (page 7-12) in the Multi Mode Chapter for details on
saving.
Once you have saved your Layer as a Multi, you can continue to add Split or Layer Zones to
the Multi until you reach the maximum of four active Zones. See the Split Function (page
7-8) and The Layer Function (page 7-10) in the Multi Mode Chapter. Also, once you have
saved your Layer as a Multi, you can edit controller assignments and other Multi parameters
in Multi Edit Mode (see Multi Edit Mode on page 8-1 for details).