Kurzweil Artis - Functions; The Split Function; The Layer Function

The Operating Modes
Functions
5-3
Functions
In addition to the four primary Modes, there are ve Functions. Some Functions are
available through dedicated buttons, others are available as Soft Buttons accessed via the
buttons under the LCD screen. These Functions are not as complex as the primary Modes
and are described below.
The Split Function
Pressing the Split Soft Button while in either Program or Multi Mode performs the Split
Function. The Split Function allows you to split Programs and Multis such that keys in one
region of the keyboard produce different sounds than another region.
Creating Splits in Program Mode is slightly different from creating Splits in Multi Mode. See
The Split Function on page 6-9 (for Splits in Program Mode) and The Split Function on
page 7-8 (for Splits in Multi Mode).
The Layer Function
Pressing the Layer Soft Button while in either Program or Multi Mode performs the Layer
Function. The Layer Function allows you to layer Programs and Multis such that more than
one sound can be produced by striking one key.