Program Mode
Selecting Programs
6-3
Press the Cancel soft button to exit Program Demo.
If you try to use the Program Demo Function from any other Mode, the display shows the
“Switch to Program Mode rst” message.
The Display
In Program Mode, the top line of the display shows the current Mode, MIDI transposition,
Category and MIDI Channel. The Program ID number and name are displayed in the center
of the display, and the Soft Buttons are displayed along the bottom line.
Factory Program Categories on the top line correspond with the labels above of the
Category Buttons. For User Programs, the Categories are labelled User 1, User 2 ... User 16.
To Next Page
Loading...
