Kurzweil Artis - MIDI Page; Destination

Global Mode
MIDI Page
9-8
MIDI Page
The Artis can transmit and receive MIDI via its MIDI ports and USB. The MIDI page in
Global Mode allows you to congure how this will be handled.
Parameter Range of Values Default Value
Destination (Destination) Local, MIDI, Local+MIDI Local+MIDI
Bank Select (BankSelect) 0, 32, 0/32 0/32
Program Change (Pro-
gramChange)
On, Off On
Channel Enable (Chan1–
16)
Enable, Disable
(For each Channel)
Enable
(On all Channels)
Local Keyboard Channel
(LclKbdChan)
None, 1 to 16 None
SysEx ID 0 to 127 0
Destination
The Destination parameter determines the destination of MIDI data generated by striking
keys or activating controllers. This data can be sent to the Artis sound engine, through the
MIDI out ports, or both. You can set this parameter to any of the three destinations for this
parameter:
Note that this parameter is always active and works in conjunction with the Multi Mode
Destination parameter (see page 8-7). These parameters act like lters, so if the Multi
Mode Destination parameter is set to Local + MIDI and the Global Mode parameter is set
to Local, the MIDI data will only be transmitted locally.