Kurzweil Artis User Manual

System Mode
System Utilities
10-12
Format Flash
CAUTION: THIS OPERATION ERASES THE OPERATING SYSTEM,
ALL FACTORY OBJECTS AND ALL USER OBJECTS.
Performing this operation will format the Artis’s system ash memory and erase the OS
software as well as all Objects. Do not do this unless you think it is necessary in order to
improve the performance of your Artis. Should you decide to do so, be sure to back up all
of your les and software. After you do this, System Mode will still be available, so you can
run updates and get your Artis up-and-running again. After a Format the unit will come up
in System Mode by default.
To perform a Format, follow these steps:
1. Follow the instructions specied on page 10-1 to enter System Mode.
2. Select System Utilities.

Kurzweil Artis Specifications

General

Sound effects	Chorus
Output impedance	400 Ω
Maximum polyphony (notes)	128
Number of transpose switches	2
Number of front panel sliders	9
Keyboard name	Fatar TP100
Keys quantity	88 keys
Headphone outputs	1
Product color	Black
Display resolution	240 x 64 pixels
AC input voltage	90-256 V
AC input frequency	50 - 60 Hz
Power consumption (max)	10 W
General MIDI	No
FX units quantity	16
Effect chains quantity	1000
User programs quantity	256
Number of relative volume zones	4
Cables included	AC, USB

Weight and Dimensions

Depth	395 mm
Width	1385 mm
Height	140 mm
Weight	21000 g