Kurzweil Artis - Physical Specifications

Physical Specications
B-1
Appendix B
Physical Specications
1
Keyboard: 88-key, fully-weighted hammer-action with velocity sensitive adjustable keys.
88-key model uses Fatar TP/100.
Display:
240x64 pixel monochrome LCD with front-panel contrast adjust.
Polyphony:
128 Voice Polyphony, dynamically allocated.
Multitimbral:
16 parts (one per MIDI channel).
Quick Split / Layer: Easy access with adjustable relative volume.
Programs: 256 Factory plus 256 User Programs.
Multis: 256 Factory Multis, plus 256 User Multi locations with 4 programmable zones
for splits and layers.
Effects: Dozens of complex effect chains, incorporated into programs. Not editable,
excepting Aux Override.
Controllers: • Pitch wheel
• Modulation wheel
• Volume Slider
• 9 front panel sliders
• 9 KB3 Control Switches / Control / Zone Mute Switches
• 1 Variation switch
• 4 Master EQ Knobs
• 1 EQ On/Off Switch
• 2 switch pedal inputs, each supporting single, dual switch pedals, or single
half damper pedals
• 1 continuous control pedal input
• 2 Transpose buttons
Analog Outputs: • Two 1/4” balanced TRS analog (24-bit DACs)
• +21DBu maximum output
• 400Ω balanced source impedance
• 24-bit D-to-A converters
Headphones:
1 front panel 1/4” headphone output
8 V
RMS
maximum output, 47Ω source impedence
MIDI: IN, OUT
USB: Complete MIDI functionality over USB
User Program / Multi le transfer to/from PC / Mac / Tablet/ USB Flash Drives.
Operating System updates from PC / Mac / USB Flash Drive
Height:
5.5” (14 cm)
Depth:
15.5” (39.5 cm)
Length:
54.5” (138.5 cm)
Weight:
46 lbs (21 kg)
Power: Internal Switched Power Supply 90-265 V AC 50/60 Hz
1 Specications subject to change without notice