System Mode
10-1
Chapter 10
System Mode
CAUTION: DO NOT ATTEMPT TO MAKE ANY CHANGES IN SYSTEM
MODE UNTIL YOU HAVE READ AND FULLY UNDERSTOOD THIS
CHAPTER
This chapter will help you familiarize yourself with the functions of System Mode.
System Mode allows you manage and upgrade the OS software of your Artis as well as
perform diagnostic tests of the instrument’s various internal systems and processes. Note
that the functions that you have access to in System Mode govern the operation of your
Artis, so only use System Mode when you must perform essential maintenance tasks.
To enter System Mode, follow these steps:
1. Power off your Artis.
2. Press and the hold the ENTER button, and power on the unit. Make sure to keep
holding the ENTER button until the display shows the following:
3. Release the ENTER button—at this point, you are in System Mode.
To Next Page
Loading...
