Kurzweil Artis - Page 155

System Mode
System Update
10-5
6. If the system was able to read the USB ash drive that was plugged in, it will display
a list of les and folders as shown above. You can use the Chan Up/Down or Alpha
wheel to move up and down the list. Select the UP soft button if you want to go up to
the parent directory level. If the KUF le is selected, select the OK button.
You will see a progress bar indicating the progress. If update was successful you will see a
conrmation message. If there was a failure you will see a self-explanatory failure message
(with error code) to indicate the failure.