Kurzweil PC3A User Manual

7-24
Setup Mode
Controllers
Controller
Number
Corresponding
Destination
Name
Description
138 ProgGoto Go to Program—selects program
139 SetupInc Setup Increment—increments current setup number
140 SetupDec Setup Decrement—increments current setup number
141 SetpGoto Go to Setup—selects setup
142 Start Sequencer function
143 Stop Sequencer function
144 Continue Sequencer function
145 TransUp Transpose Up (ST)
146 TransDown Transpose Down (ST)
147 ArpOn
Any value turns Arpeggiator On. (See The ARPEGGIATOR
Page
on page 7-42)
148 ArpOff
Any Value turns Arpeggiator Off. (See The ARPEGGIATOR
Page
on page 7-42)
149 MuteZn Mute Zone – values above 64 will mute the zone, values below
or equal to 64 will unmute the zone.
150 ArpOrder
Arpeggiator Order, each range of values selects one of nine
options in order on parameters list: 0-14, 15-28, 29-42, 43-56,
57-70, 71-84, 85-98, 99-112, 113-127. (See The
ARPEGGIATOR Page
on page 7-42)
151 ArpBeats
Arpeggiator Beats, each range of values selects one of seven
options in order on parameters list: 0-18, 19-36, 37-54, 55-72,
73-90, 91-108, 109-127. (See The ARPEGGIATOR Page
on
page 7-42)
152 ArpShift
The 88 Arpeggiator Shift steps are scaled over the 128 MIDI
controller values, so that 0 = 0 steps and 127 = 88 steps. (See
The ARPEGGIATOR Page
on page 7-42)
153 ArpLimit
The 60 Arpeggiator Shift Limit steps are scaled over the 128
MIDI controller values, so that 0 = 0 steps and 127 = 60 steps.
(See The ARPEGGIATOR Page
on page 7-42)
154 ArpLmtOp
Arpeggiator Shift Limit Option, each range of values selects
one of seven options in order on parameters list: 0-18, 19-36,
37-54, 55-72, 73-90, 91-108, 109-127. (See The
ARPEGGIATOR Page
on page 7-42)
155 ArpVel
Arpeggiator Velocity, each range of values selects one of
twenty-three options in order on parameters list: 0-5, 6-10,
11-15...101-105, 106-110, 111-127. (See The ARPEGGIATOR
Page
on page 7-42)
156 ArpDur
The Arpeggiator Duration % values are scaled over the 128
MIDI controller values, so that 0 = 1% and 127 = 100%. (See
The ARPEGGIATOR Page
on page 7-42)
157 Latch
For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 = on.
(See The ARPEGGIATOR 2 Page
on page 7-49)
158 Latch2
For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 = on.
(See The ARPEGGIATOR 2 Page
on page 7-49)
Table 7-4 Controller Destination List

Kurzweil PC3A Specifications

General

Brand	Kurzweil
Model	PC3A
Category	Electronic Keyboard
Language	English