Text Entry 26
Copy and Paste Text
You can copy or cut text and paste it in the text entry field.
1. In the text entry field, move the cursor next to the text you want to copy and press
Text mode (center or left softkey) > Copy/Cut.
2. Press the navigation key and highlight the text you want to copy or cut.
3. Press Next (left softkey) > Copy or Cut. The text is saved in the Paste List.
4. In the text entry field, move the cursor to the place where you want to paste the
text and press Text mode (center or left softkey) > Paste list.
5. Press the navigation key to scroll to the text you want to paste and press .
Note: This feature is not available where you cannot select the text input mode.
To Next Page
Loading...
