Kyocera DURAXE - Configure Video Settings

Camera and Videos 79
 Contrast to select a contrast mode from Auto or Manual. Press the navigation
key right or left to set contrast when selecting Manual.
 Brightness to select a brightness mode from Auto or Manual. Press the
navigation key right or left to set brightness when selecting Manual.
 White balance to select a white balance mode from Auto, Sunny, Cloudy,
Tungsten, or Fluorescent.
 Quality to select the picture quality setting from Fine, Normal, or Economy.
 Focus settings to select the focus setting from Continuous AF or Infinity.
● Others
 Video mode to switch to video mode.

Shutter Sound to turn the shutter sound on or off.
 Auto save to to select where to store your pictures. Select from In Phone or
On SD card (Only available when you have inserted a microSD card into your
phone).
 Auto review to select whether or not to display for review after you take a
picture.

Status bar to select whether or not to display the status bar.
 Key guidance to show keypad shortcuts in camera mode.

Reset settings to restore all camera settings to default.
Configure Video Settings
1. From the Home screen, press Menu (center softkey) > Camera > Video.
2. Press Options (left softkey) > Video tab or Others tab.
Tip: You can move from one tab to the other by pressing the navigation key right or left.
3. You can change the following settings:
● Video
 Resolution to choose the default size for videos. Select from HD720p
(1280x720), VGA (640x480), QVGA (320x240), or QCIF (176x144).