Kyocera DURAXE - Assign a Picture to a Contact; Assign a Ringtone to a Contact; Assign a Vibration Type to a Contact

Contacts 47
Assign a Picture to a Contact
1. From the Home screen, press Menu (center softkey) > Contacts > Contacts tab.
2. Highlight the contact you want to edit, press , and then press Options (left
softkey) > Edit.
3. Highlight the contact icon above the name and press .
4. To assign a new picture, select Take photo and take a picture.
– or –
To assign a stored picture, select Choose photo and select a picture.
5. You may be prompted to size the picture for use with entries. Zoom in or out the
square to frame the portion of the picture to use by pressing Zoom in (right
softkey) or Zoom out (left softkey) and press .
6. Press Save (right softkey) to assign it.
Assign a Ringtone to a Contact
Assign a ringtone to a Contacts entry so that you can identify the caller by the ringtone.
1. From the Home screen, press Menu (center softkey) > Contacts > Contacts tab.
2. Highlight the appropriate contact, press , and then press Options (left softkey)
> Set phone ringtone or Set message ringtone.
3. Highlight a ringtone and press .
Assign a Vibration Type to a Contact
You can assign a specific vibrate type to a contact.
1. From the Home screen, press Menu (center softkey) > Contacts > Contacts tab.
2. Highlight the appropriate contact, press , and then press Options (left softkey)
> Set vibrate.
3. Highlight a vibration type and press .