EasyManua.ls Logo

Kyocera DURAXE - Activate Call Waiting; Fixed Dialing Numbers (FDN)

Kyocera DURAXE
133 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Phone Calls 38
1.
From the Home screen, press Menu (center softkey) > Settings > Device > Call
setup > Call barring.
2.
Select All outgoing calls, International calls, INT’L calls except home, All
incoming calls, or Incoming when roaming.
3.
Select Activate or Deactivate. To check the current status, select Check status.
4.
Enter your password, if prompted, and press Done (left softkey).
5.
Press .
To change your password:
1.
From the Home screen, press Menu (center softkey) > Settings > Device > Call
setup > Call barring.
2.
Select Change password.
3.
Enter your current password, a new password and the new password again, and
then press Done (left softkey).
4.
Press .
Activate Call Waiting
To activate or deactivate Call waiting:
1.
From the Home screen, press Menu (center softkey) > Settings > Device > Call
setup > Call waiting.
2.
Select Activate or Deactivate. To check the current status, select Check status.
3.
Press .
Fixed Dialing Numbers (FDN)
This feature allows you to restrict your outgoing calls to the numbers included in the FDN
list. Emergency calls will not be affected by this setting.
Note: To use this feature you will have to enter your PIN2 number, which is associated
with your SIM card. If you do not know your number, please contact your carrier to
obtain it.
To enable FDN mode:

Table of Contents

Related product manuals