Phone Calls 34
To respond to an incoming call while you are on a call, putting the first caller on hold:
► Select Hold & Answer.
To switch back to the first caller:
►
Press Swap (right softkey).
– or –
►
Press .
To create a conference call between your existing calls:
► Press Options (left softkey) > Merge call.
To respond to an incoming call while you are on a call, ending the current call:
► Select End & Answer.
Conference Calling
With Conference calling, you can talk to two or more people at the same time. When using
this feature, the normal airtime rates will be charged for each of the calls.
To initiate a Conference call:
1.
Enter a number and press .
2.
Once you have established the connection, press Options (left softkey) > Add call.
(This puts the first caller on hold.)
3.
Select Contacts or Enter phone#.
4.
Select a number from your Contacts or enter a number directly, and then press .
5.
When you’re connected to the second party, press Options (left softkey) > Merge
call to begin your conference call.
6.
If you want to add another call to the existing conference, repeat steps from 2 to 5.
To unmerge a Conference call:
1.
Press Options (left softkey) > Manage conference.
2.
Highlight a caller you want to continue talking with, and press Unmerge (center
softkey). (This puts the other callers on hold.)
To Next Page
Loading...
