EasyManua.ls Logo

Kyocera DURAXE - Page 75

Kyocera DURAXE
133 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Web and Data 74
Set Up Mobile Hotspot
1.
From the Home screen, press Menu (center softkey) > Settings > Wireless &
networks > More > Tethering & Mobile Hotspot > Mobile Hotspot.
2.
Select On to turn Mobile Hotspot on.
If your phone's mobile data access is not enabled, you will be prompted to turn it
on. Follow the onscreen instructions.
3.
Press Info (left softkey) to confirm your SSID (Service Set Identifier) and password
(passkey).
Important: Write down the password (passkey) for this communication.
Connect to Mobile Hotspot
1.
Enable Wi-Fi (wireless) functionality on your target device (laptop, media device,
etc.).
2.
Scan for Wi-Fi networks on your target device and select your phones hotspot from
the network list.
3.
Follow the onscreen instructions to enter the passkey provided on the Mobile
Hotspot info screen. See Set Up Mobile Hotspot.
4.
Launch your Web browser to confirm that you have an Internet connection.
Mobile Hotspot Settings
To set up Mobile Hotspot:
1.
From the Home screen, press Menu (center softkey) > Settings > Wireless &
networks > More > Tethering & Mobile Hotspot > Mobile Hotspot settings
> Configure Mobile Hotspot.
2.
Confirm and change your Wi-Fi network SSID (Service Set Identifier) if necessary.
3.
Highlight the Security field and press and select the security level for your
Mobile Hotspot.
4.
Enter your password if you selected a security level that uses a password.
5.
Press Save (right softkey).
Note: The best way to keep using the phone as a hotspot is to have it connected to a
power supply.

Table of Contents

Related product manuals