Kyocera ECOSYS FS-C8520MFP User Manual

4-20
Copying > Interrupt Copy
Interrupt Copy
This function allows you to pause the current jobs in progress when you need to make copies immediately. When
interruption copy ends, the machine resumes the paused print jobs.
1
Press the Interrupt key.
The current print job is temporarily interrupted.
2
Make an interrupt copy.
1 Place the originals onto the machine for interrupt copy, and configure the copy settings.
2 Press the Start key to start interrupt copying.
3
End the interrupt copy.
When interrupt copying ends, press the Interrupt key. The machine resumes the paused print
jobs.
NOTE
If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically cancelled and
printing resumes. You can change the delay until interrupt copying is cancelled. Change the delay as required. For
more information, refer to Interrupt Clear Timer on page 9-25.
The interrupt copy function may be unavailable due to insufficient memory depending on the manner in which the
equipment is being utilized.
Ready for interrupt. (Full Color)
Copy Copies
Paper
Selection
Zoom Density
Duplex Combine Collate/
Offset
1-sided>>1-sided
Auto 100% Normal 0
CollateOff
Functions
10:10
Shortcut 1 Shortcut 2
GB0001_99

Kyocera ECOSYS FS-C8520MFP Specifications

General

Category	Printer
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (B/W)	20 ppm
Print Speed (Color)	20 ppm
Max Print Speed (B/W)	20 ppm
Max Print Speed (Color)	20 ppm
Print Resolution	600 x 600 dpi
Max Print Resolution	9600 x 600 dpi
Max Paper Size	A3
Duplex Printing	Yes
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Duplex Scanning	Yes
Copy Resolution	600 x 600 dpi
Fax	Yes
Supported Paper Sizes	A3, A4, A5, A6, B5, Letter, Legal
Monthly Duty Cycle	65000 pages
Max Paper Capacity	1600 sheets
Memory	1 GB
Connectivity	USB, Ethernet
Copier Speed (B/W)	20 ppm
Copier Speed (Color)	20 ppm
Copy Speed (B/W)	20 ppm
Copy Speed (Color)	20 ppm
Display	4.3-inch touch screen