9-24
Setup, Registration, and User Management > System Menu
Main Memory
Date/Timer
Configures settings related to the date and time.
Item Description
Main Memory Select the memory allocation scheme based on the application in which you are using the
equipment.*
Value: Printer Priority, Normal, Copy Priority
* After changing the setting, restart the system or turn the machine OFF and then ON.
Item Description
Date/Time Set the date and time for the location where you use the machine. If you perform Send as E-
mail, the date and time set here will be displayed on the header.
Value: Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23), Minute (00 to 59),
Second (00 to 59)
Date Format Select the display format of year, month, and date. The year is displayed in Western notation.
Value: Month/Day/Year, Day/Month/Year, Year/Month/Day
Time Zone Set the time difference from GMT. Choose the nearest listed location from the list.
Auto Panel Reset If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE: The time allowed to elapse before the panel is reset is set with the Panel Reset
Timer.
Panel Reset Timer If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value: 5 to 495 seconds (every five seconds)
NOTE: If you select [Off] for [Auto Panel Reset], the time display does not appear.
Low Power Timer Set amount of time before entering the Low Power mode.
Value: 1 to 240 minutes (1 minute increments).
Auto Sleep Set Auto Sleep to automatically enter Sleep Mode after a period of inactivity.
Value: Off, On
NOTE: Refer to Sleep and Auto Sleep on page 2-23 for Sleep.
The time allowed to elapse until the auto sleep function is activated is set with the Sleep
Timer.
To Next Page
Loading...
Need help?
General