Kyocera ECOSYS FS-C8520MFP - Replacing Staples

10-5
Troubleshooting > Replacing Staples
Replacing Staples
If a message displays indicating that staples have run out, the staple cartridge holder need to be replenished with
staples.
1
Remove the staple cartridge holder.
After the cartridge holder returned to the original position, open the staple cover and remove
the cartridge holder.
2
Remove the empty staple cartridge.
3
Insert the new staple cartridge.
4
Re-install the staple cartridge holder.
The staple cartridge holder will click into place when it has been inserted correctly.
NOTE
If the Staple Unit runs out of staples, contact your service representative or the place of purchase.
NOTE
The staple cartridge can only be removed when it contains no more staples.