Kyocera ECOSYS FS-C8520MFP User Manual

10-8
Troubleshooting > Solving Malfunctions
Solving Malfunctions
The table below provides general guidelines for problem solving.
If a problem occurs with your machine, look into the checkpoints and perform procedures indicated on the following
pages. If the problem persists, contact your Service Representative.
Symptom Checkpoints Corrective Actions Reference
Page
An application does not start. Is the Auto Panel Reset time short? Set the Auto Panel Reset time to 30
seconds or more.
9-24
The screen does not respond
when the main power switch
is turned on.
Is the machine plugged in? Plug the power cord into an AC outlet. 2-11
Pressing the Start key does
not produce printouts.
Is there a message on the screen? Determine appropriate response to the
message and respond accordingly.
10-14
Is the machine in Sleep mode? Press the Power key to recover the
machine from Sleep mode.
2-23
Blank sheets are ejected. Are the originals loaded correctly? When placing originals on the platen,
place them face-down and align them
with the original size indicator plates.
3-7
When placing originals in the
document processor, place them face-
up.
3-9
— Check that the settings of the
application software.
—
Printouts are totally too light. Is the paper damp? Replace the paper with new paper. 3-2
If you experience frequent problems,
turn the cassette heater switch on.
2-4
Have you changed the density? Select appropriate density level. 3-51
9-26
Is the toner distributed evenly within
the toner container?
Shake the toner container from side to
side about several times.
10-2
Is there a message indicating the
addition of toner?
Replace the toner container. 10-2
Is EcoPrint mode enabled? Disable EcoPrint mode. 4-15
— Press the System Menu/Counter key,
[Adjustment/Maintenance], [Service
Setting], [DEV-CLN], and then press
[Start].
—
— Run [Laser Scanner Cleaning]. 9-27
— Make sure the paper type setting is
correct the paper being used.
9-8
Printouts are too dark even
though the background of the
scanned original is white.
Have you changed the density? Select appropriate density level. 3-51
9-26

Kyocera ECOSYS FS-C8520MFP Specifications

General

Category	Printer
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (B/W)	20 ppm
Print Speed (Color)	20 ppm
Max Print Speed (B/W)	20 ppm
Max Print Speed (Color)	20 ppm
Print Resolution	600 x 600 dpi
Max Print Resolution	9600 x 600 dpi
Max Paper Size	A3
Duplex Printing	Yes
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Duplex Scanning	Yes
Copy Resolution	600 x 600 dpi
Fax	Yes
Supported Paper Sizes	A3, A4, A5, A6, B5, Letter, Legal
Monthly Duty Cycle	65000 pages
Max Paper Capacity	1600 sheets
Memory	1 GB
Connectivity	USB, Ethernet
Copier Speed (B/W)	20 ppm
Copier Speed (Color)	20 ppm
Copy Speed (B/W)	20 ppm
Copy Speed (Color)	20 ppm
Display	4.3-inch touch screen