Kyocera ECOSYS FS-C8520MFP User Manual

2-18
Preparation before Use > Installing Software
Installing Printer Driver in Macintosh
The machine's printer functionality can be used by a Macintosh computer.
1
Insert the DVD.
Double-click the Kyocera icon.
2
Display the screen.
Double-click either OS X 10.2 and 10.3 Only, OS X 10.4 Only or OS X 10.5 or higher
depending on your Mac OS version.
3
Install Printer Driver.
Install the printer driver as directed by the instructions in the installation software.
This completes the printer driver installation.
Next, specify the print settings. If an IP connection is used, the settings below are required. If a
USB connection is used, the machine is automatically recognized and connected.
NOTE
Installation on MAC OS must be done by a user logged on with administrator privileges.
When printing from a Macintosh computer, set the machine’s emulation to “KPDL” or “KPDL(Auto)”. For details about
the configuration method, refer to Printer on page 9-17.
If connecting by Bonjour, enable Bonjour in the machine's network settings. For details, refer to
Network on page 9-19.
In the Authenticate screen, enter the name and password used to log in to the operating system.
Double-click
Double-click
1
2

Kyocera ECOSYS FS-C8520MFP Specifications

General

Category	Printer
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (B/W)	20 ppm
Print Speed (Color)	20 ppm
Max Print Speed (B/W)	20 ppm
Max Print Speed (Color)	20 ppm
Print Resolution	600 x 600 dpi
Max Print Resolution	9600 x 600 dpi
Max Paper Size	A3
Duplex Printing	Yes
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Duplex Scanning	Yes
Copy Resolution	600 x 600 dpi
Fax	Yes
Supported Paper Sizes	A3, A4, A5, A6, B5, Letter, Legal
Monthly Duty Cycle	65000 pages
Max Paper Capacity	1600 sheets
Memory	1 GB
Connectivity	USB, Ethernet
Copier Speed (B/W)	20 ppm
Copier Speed (Color)	20 ppm
Copy Speed (B/W)	20 ppm
Copy Speed (Color)	20 ppm
Display	4.3-inch touch screen