2-25
Preparation before Use > Command Center RX (Settings for E-mail)
Command Center RX (Settings for E-mail)
Command Center RX is a tool used for tasks such as verifying the operating status of the machine and changing the
settings for security, network printing, E-mail transmission and advanced networking.
This section explains how to access Command Center RX and configure e-mail settings. For details on Command
Center RX, refer to the Command Center RX User Guide.
The procedure for accessing Command Center RX is explained below.
1
Display the screen.
1 Launch your Web browser.
2 In the Address or Location bar, enter the machine’s IP address.
E.g.) http://192.168.48.21/
The web page displays basic information about the machine and Command Center RX as well
as their current status.
2
Configure the function.
Select a category from the navigation bar on the left of the screen. When you log in to the
machine as an administrator, Settings appear.
Here, information on the FAX settings has been omitted. For more information on using the
FAX, refer to the Fax System (U) Operation Guide.
The optional Fax Kit is required in order to make use of fax functionality.
To fully access the features of the Command Center RX pages, enter the User Name and
Password and click Login. Entering the predefined administrator password allows the user
to access all pages, including Document Box, Address Book, and Settings on the navigation
menu.
The factory default setting for the default user with administrator privileges is shown below.
Login User Name: Admin
Login Password: Admin
* Upper case and lower case letters are distinguished (case sensitive).
To Next Page
Loading...
Need help?
General