Kyocera ECOSYS M4132idn

Device Settings
Printer Driver 3-15
User Settings
With this feature, you can specify user and department names, select the
default unit of measure, and change the driver display language.
In a client/server environment, Department and Units are unavailable to a
client logged in as a restricted user. User name and Language preference can
be changed.
Identification
With this feature, you can identify your print job with a User name and
Department name, to a maximum of 31 characters. Double-byte characters are
supported. The User name can be used to identify a print job stored on the
storage device.
In a client/server environment, a client user can change the User name. This
does not change the default user name selection in the server.
Setting User Identification
1
In Device Settings > User, type your preferred name in the User name text
box.
2
Type your department or group name in the Department text box.
You can type a maximum of 31 characters in the User name and Department
text boxes.
3
Click OK in all dialog boxes.
Units
With this feature, you can set Inches or Millimeters as the unit of
measurement. This is used for the following settings:
Page Sizes settings in the Basic tab.
Spacing setting in the Add Watermark and Edit Watermark dialog boxes in
the Advanced tab.
Poster settings in the Layout tab.
Gutter settings in the Layout or Finishing tab.
Selecting a Unit of Measurement
1
In Device Settings > User, select Inches or Millimeters.
2
Click OK in all dialog boxes.
Language Preference
With this feature, you can specify the user interface language of Device
Settings in Properties and all tabs of Printing Preferences.
Available languages vary depending on your locale and your computer settings.
Setting Language Preference
1
In Device Settings > User, select the desired language from the Select
language list.