Kyocera ECOSYS M4132idn

Basic
User Guide5-4
Carbon copies is unavailable when Net Manager is selected in Device
Settings > Administrator > Net Manager.
Printing Carbon Copies
1
In the Basic tab, select a source and number of copies for the original copy.
2
For each carbon copy, load the desired media types or colored paper into
additional paper sources.
3
Select the Carbon copies check box.
4
Click Settings.
5
In the Carbon Copy Settings dialog box, select the number of copies for each
source.
The total number of copies for all sources is displayed under Total.
6
Select a Source or Media type or both for each carbon copy.
7
Click OK in all dialog boxes.
Batch Copies
With this feature, you can separate the copies of a print job into batches. You
can select the number of copies in each batch.
You can name each batch printing job and save the settings for later use. This is
useful for exporting and importing batch settings.
A cover page can be added to each batch, printed with an optional job name
and title. The cover page can be a different size, media type, and orientation
from the main document. Size, media type, and source options can be different
from those in the Basic tab. When User Login or Job accounting are selected
in Device Settings > Administrator, a cover page cannot be added.
This feature turns on the Collate feature in the Quick Print and Basic tabs.
When used with Quick copy, only one batch is saved in the storage device, and
batch cover pages are not saved or printed.
Batch copies is available when PCL XL or PCL 5e is selected as the PDL.
When using this feature, Copies and Carbon copies are unavailable. Batch
copies is unavailable when Net Manager is used.
Printing Batch Copies
1
In the Basic tab, select Batch copies.
2
Click Settings.
3
In the Batch Copy Settings dialog box, click New to add batches to the list.
4
Under Copies, enter the number of copies for the selected batch.