7-15
Setup and Registration (System Menu) > System Menu
Sleep Level Set.
[
Menu
] key > [
▲
] [
▼
] key > [
Device Common
] > [
►
] key > [
▲
] [
▼
] key > [
Sleep Level Set.
] > [
►
] key
RAM Disk Mode
[
Menu
] key > [
▲
] [
▼
] key > [
Device Common
] > [
►
] key > [
▲
] [
▼
] key > [
RAM Disk Mode
] > [
OK
] key
User/Job Account
[
Menu
] key > [
▲
] [
▼
] key > [
User/Job Account
] > [
►
] key
Configure settings related to machine management.
Overview of User Login Administration (page 8-2)
Overview of Job Accounting (page 8-6)
Unknown ID Job (page 8-19)
Item Description
Sleep Level (models except for
Europe)
Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than
Quick Recovery
mode.
Value: Quick Recovery, Energy Saver
When the optional Network Interface Kit is installed, this is not displayed.
Network
Set whether to use the Energy Saver mode for Network.
Value: Off, On
Card Reader
*1
*1 Displayed only when the optional Card Authentication Kit is activated.
Set whether to use the Energy Saver mode for Card Reader.
Value: Off, On
When the machine enters Energy Saver, the ID card cannot be recognized.
This function will not be displayed when the optional SSD is installed.
Item Description
RAM Disk Mode A RAM disk can be created and its size can be set.
Creating a RAM disk makes it possible to print from a Job Box.
Value
RAM Disk Mode: On, Off
RAM Disk Size: The setting range varies depending on the amount of memory installed
and the option memory usage setting.
After changing the setting, restart the network or turn the machine OFF and then ON.