2-41
Installing and Setting up the Machine > Command Center RX
Creating a New Custom Box
You can register a custom box from Command Center RX.
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Print the status page to check the machine's IP address and the host name.
[Menu] key > [▲] [▼] key > [Report Print] > [►] key > [▲] [▼] key > [Print Status Page] >
[OK] key > [OK] key
3
From the [
Document Box
] menu, click [
Custom Box
].
4
Click [
Add
].
2
Configure the Custom Box.
1
Enter the box details.
Enter the information for the custom box you want to register. For details on the fields to populate,
refer to the following:
2
Click [
Submit
].
To use Custom Box, an optional SSD must be installed in the machine.
Command Center RX User Guide
To Next Page
Loading...
