10-8
Appendix > Optional Equipment
Optional Applications
Overview of the Applications
The applications listed below are installed on this machine.
Starting Application Use
Use the procedure below to start using an application.
1
[
Menu
] > [▲] [▼] key > [
Op functions
] > [►] key
2
Enter the administrator ID and select the [
OK
] key.
3
Enter the administrator password and select the [
OK
] key.
4
Select [
Details
] of the application you will start using, and select the [►] key.
5
[▲] [▼] key > [
Official
] > [
OK
] key > [
OK
] key
To use the application as a trial, select [
Trial
] without entering the license key.
Application
Data Security Kit
Card Authentication Kit
*1
*1 This can be used on a trial basis for a limited time.
ThinPrint Option
*1
• Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
• If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
Enter an ID consisting of between 1 and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator ID is 3000.
Enter a password consisting of between 0 (no settings) and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator password is 3000.
To Next Page
Loading...
