Kyocera ECOSYS P6130cdn

2-16
Installing and Setting up the Machine > Default Settings of the Machine
11Set the default gateway.
12Select the [OK] key.
Wireless Network Settings
When the optional Wireless Network Interface Kit is installed on the machine and the connection settings are configured,
it is possible to print in a wireless network (wireless LAN) environment. Information on the wireless network settings,
refer to the following:
IB-51 User's Manual
Manual setting from the printer is not supported on this device.
NOTE
You can set any value between 000 and 255.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
IMPORTANT
After changing the setting, restart the network from System Menu, or turn the
machine OFF and then ON.
Restart Printer (page 7-23)
NOTE
The network can be configured from the computer by using Command Center RX.
Command Center RX User Guide