Kyocera ECOSYS P6130cdn

7-16
Setup and Registration (System Menu) > System Menu
Network
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Network ] > [ ► ] key
Configures machine system settings.
Item Description
TCP/IP This setting is available when [TCP/IP] is set to [On]. Select whether to use TCP/IP (IPv4)
protocol.
Value: Off, On
DHCP Select whether or not to use the DHCP (IPv4) server.
Value: Off, On
NOTE
This setting is displayed when the TCP/IP setting is [On].
Auto-IP Select whether to use Auto-IP.
Value: Off, On
NOTE
This setting is displayed when the TCP/IP setting is [On].
IP Address Set the IP addresses.
Value: ###.###.###.###
NOTE
This setting is displayed when the TCP/IP setting is [On].
If DHCP is set to [On], this item is displayed only and cannot be entered.
Subnet Mask Set the IP subnet masks.
Value: ###.###.###.###
NOTE
This setting is displayed when the TCP/IP setting is [On].
If DHCP is set to [On], this item is displayed only and cannot be entered
Default Gateway Set the IP gateway addresses.
Value: ###.###.###.###
NOTE
This setting is displayed when the TCP/IP setting is [On].
If DHCP is set to [On], this item is displayed only and cannot be entered.
Bonjour Select whether or not to use Bonjour.
Value: Off, On
NOTE
This setting is displayed when the TCP/IP setting is [On].
TCP/IP (IPv6) Select whether to use TCP/IP (IPv6) protocol.
Value: Off, On
RA (Stateless) Select whether to use RA (Stateless).
Value: Off, On
NOTE
This setting is displayed when [TCP/IP (IPv6)] is set to [On].
DHCPv6 Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
This setting is displayed when [TCP/IP (IPv6)] is set to [On].