8-18
User Authentication and Accounting (User Login, Job Accounting) > Using Job Accounting
Using Job Accounting
This section explains procedures while setting job accounting.
Login/Logout
If job accounting is enabled, an account ID entry screen appears each time you use this machine.
Use the procedure below to login and logout.
Login
1
In the account ID entry screen, enter the account ID using the arrow key and select the
[
OK
] key.
2
Proceed to complete the rest of the steps.
Logout
When the operations are complete, select the [
Logout
] key to return to the account ID entry screen.
You can set a number from 1 to 8 digits.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
If the entered account ID does not match the registered ID, a warning beep will sound
and login will fail. Enter the correct account ID.
To Next Page
Loading...
