Kyocera ECOSYS P6130cdn

7-18
Setup and Registration (System Menu) > System Menu
Optional Network
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Optional Network ] > [ ► ] key
Configure settings for the optional Network Interface Kit or Wireless Network Interface Kit.
NOTE
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Item Description
TCP/IP For details on setting value.
TCP/IP (page 7-16)
TCP/IP (IPv6) For details on setting value.
TCP/IP (IPv6) (page 7-16)
NetWare Use NetWare to receive documents.
Value: Off, On
AppleTalk Selects whether to receive documents using AppleTalk.
*1
Value: Off, On
IPSec Select whether to use IPSec.
Value: Off, On
LAN Interface Select the LAN Interface type.
*1
NOTE
Value: Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full, 1000BASE-T
This function is displayed when the optional Network Interface Kit is installed.
*1 The setting will be changed after restarting the device or network.
MACAddressFilter Select whether to use MAC Address Filter.
Operation Guide for the optional Network Interface Kit
Value: Off, On
Communication Specify the network interface card to be used for the send function and the network
authentication.
Value: Standard NIC, Option NIC
Restart Network Restarts the network card of the device.