EasyManuals Logo

Kyocera ECOSYS P6130cdn User Manual

Kyocera ECOSYS P6130cdn
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
2-40
Installing and Setting up the Machine > Command Center RX
4
Configure the settings.
Enter "SMTP" and "E-mail Send Settings" items.
5
Click [Submit].
Setting Description
SMTP Set to send e-mail from the machine.
SMTP Protocol Displays the SMTP protocol settings. Check that "SMTP Protocol"
is set to [On]. If [Off] is set, click [Protocol] and set the SMTP
protocol to [On].
SMTP Server Name
*1
*1 Be sure to enter the items.
Enter the host name or IP address of the SMTP server.
SMTP Port Number Specify the port number to be used for SMTP. Use the SMTP
default port 25.
SMTP Server Timeout Set the amount of time to wait before time-out in seconds.
Authentication Protocol To use SMTP authentication, enter the user information for
authentication.
SMTP Security Set SMTP security.
Turn on "SMTP Security" in "SMTP (E-mail TX)" on the
[Protocol Settings] page.
Connection Test Tests to confirm that the settings are correct.
Domain Restriction To restrict the domains, click the [Domain List] and enter the
domain names of addresses to be allowed or rejected. Restriction
can also be specified by e-mail address.
POP3 POP3 Protocol You don't need to set the following items when you only enable the
function of sending e-mail from the machine. Set the following
items if you want to enable the function of receiving e-mail on the
machine.
Command Center RX User Guide
Check Interval
Run once now
Domain Restriction
POP3 User Settings
E-mail
Send
Settings
E-mail Size Limit Enter the maximum size of E-mail that can be sent in kilobytes.
When E-mail size is greater than this value, an error message
appears and E-mail sending is cancelled. Use this setting if you
have set E-mail Size Limit for SMTP server. If not, enter a value of
0 (zero) to enable E-mail sending regardless of the size limit.
Sender Address
*1
Specify the sender address for when the machine sends E-mails,
such as the machine administrator, so that a reply or non-delivery
report will go to a person rather than to the machine. The sender
address must be entered correctly for SMTP authentication. The
maximum length of the sender address is 128 characters.
Signature Enter the signature. The signature is free form text that will appear
at the end of the E-mail body. It is often used for further
identification of the machine. The maximum length of the
signature is 512 characters.
Function Defaults Change the function default settings in [Common/Job Default
Settings] page.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS P6130cdn and is the answer not in the manual?

Kyocera ECOSYS P6130cdn Specifications

General IconGeneral
ColorYes
Print technologyLaser
Maximum resolution9600 x 600 DPI
Duplex printing modeAuto
Time to first page (black, normal)7 s
Time to first page (color, normal)8 s
Print speed (black, normal quality, A4/US Letter)30 ppm
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle100000 pages per month
Number of print cartridges4
Page description languagesMicrosoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3
Paper input typeCassette, Paper tray
Total input capacity600 sheets
Total output capacity250 sheets
Maximum input capacity2100 sheets
Total number of input trays2
Maximum number of input trays5
Multi-Purpose tray input capacity100 sheets
Custom media width70 - 216 mm
Maximum print size216 x 356 mm
Custom media length148 - 356 mm
Paper tray media typesPlain paper
Paper tray media weight60 - 163 g/m²
Non-ISO print media sizesFolio (media size), Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Wi-FiNo
Mobile printing technologiesApple AirPrint
Standard interfacesEthernet, USB 2.0
USB 2.0 ports quantity3
Processor familyPowerPC
Noise level (idle)38.6 dB
Maximum internal memory2048 MB
Sound pressure level (printing)49.2 dB
Sound pressure level (quiet mode)46.3 dB
DisplayLCD
CertificationTUV, GS, CE
Product colorBlack, White
Display number of lines2 lines
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.1 W
Power consumption (standby)56 W
Power consumption (printing)479 W
Power consumption (PowerSave)2 W
Sustainability certificatesENERGY STAR
Mac operating systems supportedMac OS X 10.5 Leopard
Other operating systems supportedAndroid, iOS
Weight and Dimensions IconWeight and Dimensions
Depth532 mm
Width390 mm
Height410 mm

Related product manuals