7-20
Setup and Registration (System Menu) > System Menu
SSL Server
[
Menu
] key
> [
▲
] [
▼
] key >
[
Security
] > [
►
] key
> [
▲
] [
▼
] key >
[
SSL Server
] > [
OK
] key
IPSec
[
Menu
] key
> [
▲
] [
▼
] key >
[
Security
] > [
►
] key
> [
▲
] [
▼
] key >
[
IPSec
] > [
OK
] key
Item Description
SSL Server Select the SSL server settings.
Value: Off, On
DES Set whether or not the encryption method is DES.
Value: Off, On
This setting is displayed when [SSL Server] is set to [On].
3DES Set whether or not the encryption method is 3DES.
Value: Off, On
This setting is displayed when [SSL Server] is set to [On].
AES Set whether or not the encryption method is AES.
Value: Off, On
This setting is displayed when [SSL Server] is set to [On].
IPP over SSL Select whether or not to use IPP over SSL.
Value: Off, On
This setting is displayed when [SSL Server] is set to [On].
When selecting [On], the certificates must be installed.
Command Center RX User Guide
HTTPS Select whether or not to communicate using HTTPS.
*1 *2
Value: Off, On
This setting is displayed when [SSL Server] is set to [On].
*1 The setting will be changed after restarting the device or the network for the machine.
*2 Set "SSL Server" to [On].
SSL Server (page 7-20)
Item Description
IPSec Make this setting when you use IPSec.
Value: Off, On