To Next Page
R
russellrobertSep 2, 2025
What to do if my Kyocera Printer produces a skewed-color printout?
- CCharles YoungSep 2, 2025
Conduct color registration using the printer operation panel.
What to do if my Kyocera Printer produces a skewed-color printout?
Conduct color registration using the printer operation panel.
Why is my Kyocera ECOSYS P7035cdn Printer emitting steam?
The steam emitted from your printer is likely due to the evaporation of moisture from the paper caused by heat generated during printing, especially if the room temperature is low or damp paper is used. This is normal and not a cause for concern. If the steam bothers you, try raising the room temperature or using newer, dryer paper.
What to do if my Kyocera ECOSYS P7035cdn Printer displays 'Memory is full. Print job cannot be processed completely.'?
This message means that the printer's internal memory is full. You can try adding more memory to the printer. Press [OK] to attempt to resume printing or [Cancel] to stop the print job. If Auto Error Clear is on, printing will automatically resume after a set time.
What to do if my Kyocera ECOSYS P7035cdn Printer displays 'Replace the toner. [C][M][Y][K] Clean the printer.'?
This message means that the toner has run out in the indicated toner container(s). Replace the empty toner container(s) with a new toner kit for the specified color(s). The printer will not operate until you replace the toner. For example, if the message says 'Replace toner.[C][K]', replace the cyan and black toner containers.
How to fix Kyocera ECOSYS P7035cdn when it prints faint or blurred?
First, ensure that the paper type setting matches the paper you're using. Next, try performing a color calibration by either turning the printer off and on or using the operation panel. You can also adjust the color control settings in the printer driver. Finally, check the operation panel for a 'Toner is low' message and replace the toner if necessary.
What to do if my Kyocera Printer displays 'Load paper in cassette #'?
This message indicates that the paper cassette matching the print job's paper size and type is empty. Load paper into the cassette indicated by '#'. Press [OK] to continue printing, or press [Alt.] to select a different paper source.
What to do if my Kyocera Printer says 'Add paper in MP tray'?
This message appears when the paper has run out in the displayed paper source. Simply supply paper to the indicated paper cassette, MP tray, or optional paper feeders. The message will alternate with printer status messages.
General| Color | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 600 x 600 DPI |
| Duplex printing mode | Auto |
| Time to first page (black, normal) | 8 s |
| Print speed (black, normal quality, A4/US Letter) | 35 ppm |
| Printing colors | Black, Cyan, Magenta, Yellow |
| Maximum duty cycle | 150000 pages per month |
| Number of print cartridges | 4 |
| Page description languages | Microsoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3 |
| Paper input type | Cassette, Paper tray |
| Total input capacity | 650 sheets |
| Total output capacity | - sheets |
| Maximum input capacity | 2650 sheets |
| Total number of input trays | 2 |
| Maximum number of input trays | 6 |
| Multi-Purpose tray input capacity | 150 sheets |
| Custom media width | 70 - 216 mm |
| Maximum print size | 216 x 356 mm |
| Custom media length | 138 - 356 mm |
| Paper tray media types | Plain paper |
| Paper tray media weight | 60 - 120 g/m² |
| Non-ISO print media sizes | Folio (media size), Letter (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Wi-Fi | No |
| Mobile printing technologies | - |
| Standard interfaces | Ethernet, USB 2.0 |
| Optional connectivity | Wireless LAN |
| Processor model | 465S |
| Processor family | PowerPC |
| Maximum internal memory | 1536 MB |
| Sound power level (standby) | 33.7 dB |
| Sound pressure level (printing) | 53.2 dB |
| Display | LCD |
| Certification | TÜV/GS, CE |
| Product color | Black, White |
| Display number of lines | 5 lines |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 0 W |
| Power consumption (standby) | 86 W |
| Power consumption (printing) | 622 W |
| Power consumption (PowerSave) | 4 W |
| Mac operating systems supported | Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks |
| Sustainability certificates | Blue Angel, ENERGY STAR |
Weight and Dimensions| Depth | 518 mm |
|---|---|
| Width | 345 mm |
| Height | 512 mm |
Details components located at the front of the printer, including the operation panel and trays.
Identifies components on the left side of the printer, such as the left cover and toner containers.
Explains internal parts like the paper transfer unit and duplex unit.
Lists components at the rear of the printer, including interface slots and covers.
Describes the controls and indicators on the printer's operation panel.
Guides users on configuring network settings like IP address, TCP/IP, and security protocols.
Provides step-by-step instructions for installing printer drivers on Windows and Macintosh.
Explains how to use the Status Monitor to check printer status, jobs, and toner levels.
Details the Low Power Mode and Sleep modes for reducing energy consumption.
Provides essential guidelines for selecting and using paper to prevent jams and ensure print quality.
Offers advice on paper composition, sizes, smoothness, and moisture content for optimal printing.
Lists and describes special paper types like transparencies, labels, and envelopes for printing.
Explains how to set paper types for different paper sources for automatic printer selection.
Describes the LCD display, keys, and indicators on the printer's operation panel.
Details how to set paper size and type for MP tray and cassettes via the operation panel.
Covers settings like paper source, duplex printing, emulation mode, and print quality.
Guides on configuring TCP/IP, IPv4, IPv6, and other network protocols for printer connectivity.
Explains how to configure network security, interface blocking, and security levels for printer access.
Details how to set up administrator ID and password for managing printer operations and security.
Provides an overview of basic maintenance tasks, including toner and waste toner box replacement.
Step-by-step guide on how to replace toner containers, including precautions and tips.
Instructions for replacing the waste toner box, ensuring proper disposal and printer operation.
Details how to clean the paper transfer unit and other internal printer parts for optimal print quality.
Offers basic solutions for common printer issues like print quality, paper jams, and power problems.
Addresses specific print quality issues like skewed colors, blank output, and dropouts dots with corrective actions.
Lists common error messages and provides corrective actions for self-troubleshooting.
Step-by-step instructions for removing paper jams from various locations within the printer.
Explains USB and network interface signals, specifications, and pin assignments.
Details how to install and handle expansion memory modules for increasing printer capacity.
Lists technical specifications like printing method, speeds, resolution, memory, and operating systems.
