Troubleshooting > Troubleshooting
317
Cannot start printing
Is the machine plugged in?
Plug the power cord into an AC outlet.
Is the power turned on?
Turn the power switch on.
1
Turn the power switch on.
IMPORTANT
When turning off the power switch, do not turn on the power switch again immediately. Wait more than 5
seconds, and then turn on the power switch.
Are the USB cable and network cable connected?
Make sure to connect the USB cable and network cable securely.
Connect the network cable
IMPORTANT
If the power is on, turn the power switch off.
➡ Power off (page 36)
To Next Page
Loading...
