Printing from Applications
77
3 Click the
Optimization list and select Fast Printing or Document Portability. Refer to the
options and descriptions below.
4 Determine the
Options settings. Refer to the options and descriptions below.
5Click
OK to save your settings.
Image Data Format
Options
Descriptions
Fast Printing (Recommended) Delivers image data in binary format. You can
reduce the amount of spooler data and raise printing speed.
Document Portability Delivers image data in ASCII (7 bit) format.
Options Descriptions
Print Text as Black Prints color and gray characters in black.
There is no effect on white text, color images, or graphics.
Print Graphics as Black
(monochrome printers
only)
Prints colored graphics or text in black, without using grayscales.
There is no effect on images or photographs (*.bmp, *.jpg, *.psd,
*.tiff).
This function is enabled in CAD applications only.
Reverse Image Outputs a reversed black and white negative effect.
Mirror Print Prints a mirror image of the page, with right and left reversed.
Produces a mirror-like effect.
Halftone Screen
(monochrome printers
only)
By disabling GDI compatible mode check box in the PDL
Settings, you can enable the halftone screen settings.
You can adjust the dithering process by changing the number of dot
lines, angle, and dot shapes.
Images are divided into dots. As the number of the dot lines increases
and the interval between the dots grows smaller, the image is printed
more distinctly. As the number is reduced and the interval between the
dots is increased the image is printed more coarsely. For further
details, refer to the next item, Half Tone Screen Settings on page 78.
To Next Page
Loading...
Need help?
General